Gas shielded Hardfacing Wires


Product Detail

production introduction
wire packaging

Gas shielded Hardfacing Wires

Gas shielded Hardfacing Wires

Application Model Diameter[mm] Hardness[HRC] Main Ingredient
High manganese steel hardfacing wire, Suitable for hardfacing    hammer head, hammer plate and other high impact parts D114 1.6 50-55 C, Cr, Mn
Suitable for hardfacing bucket gear, mining machinery and other wear parts D172 1.2, 1.6 ≥40 C, Cr, Mo
Suitable for hardfacing the surface of wear parts, such as gear,    digger. mining machinery and etc. D212 1.2, 1.6 ≥45 C, Cr, Mo
Suitable for hardfacing high manganese rail, bulldozer and other wear parts under impact. D256 1.6 HB≥170 C, Mn
Suitable for hardfacing continuous casting roll D313 1.6 45-50 C, Cr
Suitable for repairing die and toughening tool, and mechanical    parts with high wear performance D322 1.6 55-63 C, W, Mo
Suitable for hardfacing hot rolling roll D405 1.6 53-60 C, Cr, Mo, W, V
Suitable for hardfacing general corrosion resistant parts D430 1.6 35-40 C, Cr
Suitable for hardfacing valve D502Mo 1.6 35-45 C, Cr, Mo
Suitable for hardfacing continuous casting roll D518 1.6 40-50 C, Cr, Mo, Ni
Suitable for hardfacing heavy wear parts, multi-layer welding up   to 50 mm D688 1.2, 1.6 50-58 C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up     to 20 mm D788 1.2, 1.6 50-60 C, Cr
 Suitable for hardfacing heavy wear part, single layer welding only  D788A 1.2, 1.6 50-60 C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up   to 10 mm D888 1.2, 1.6 58-65 C, Cr
 Suitable for hardfacing heat resistant wear parts  D995 1.6 58-65 C, Cr, Nb, W, V

 

wire01
wire05
wire02
wire08
wire05-

  • Previous:
  • Next:

  • Write your message here and send it to us

    related products