Frequently Asked Questions

Absolutely. We support processing services according to drawings, and provide a variety of customized processing such as laser/plasma cutting, hole opening, bending, groove treatment, etc.

The cladding layer of Wodon CCO wear-resistant plate is tightly bonded to the substrate and will not fall off under normal use.

No. Surface cracks are stress release cracks formed naturally during the cladding process, which helps to mitigate the impact of thermal expansion and contraction of the board surface and will not affect the service life and performance.

It is the key component that determines the wear resistance. The Cr content in Wodon products is usually 27–45%, forming dense Cr7C3 carbides.

The conventional thickness is 3–20 mm, and it can be thicker on demand, up to 50 mm, suitable for extreme wear occasions.

Parts with strong wear, such as blanking ports, guide troughs, chute linings, corner elbows, screen plates, slideways, and pipe linings.

Yes, we offer complete cutting, bending, drilling, welding, and machining services to meet your project’s needs.

Simply send us the following:
Dimensions (thickness × width × length)
Quantity
Application
Any special processing needs (cutting, hole drilling, etc.)
We'll reply with a competitive quote within 24 hours.