China Trending Products Screening Plate - WD1000/1100 Wear Plate – Wodon factory and manufacturers

Trending Products Screening Plate - WD1000/1100 Wear Plate – Wodon

Product Detail

Feedback (2)

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Chromium Carbide Wear Parts, Hard Faced Wear Plate, D80, If you are fascinated in any of our products, you should come to feel no cost to call us for more aspects. We hope to cooperate with a lot more close friends from all over the world.

Trending Products Screening Plate - WD1000/1100 Wear Plate – Wodon Detail:

WD1000/WD1100 series
Abrasion Resistant Chromium Carbide Overlay

WD1000/WD1100 is chromium carbide composite cladding fusion bonded to a mild steel backing plate. The deposit has been realized by means of flux cored arc welding. WD1000/WD1100 wear plate is suitable for application involving high abrasion and low to medium impact.

● WD1000/WD1100 series:

Common chromium carbide wear plates produced by flux cored arc welding; Suited for applications involving high abrasion and low to medium impact.

Chemicals	Hardness	Sheet Size	Base Metal
C – Cr – Fe	HRC 58-63	1400*3400	Q235/Q345. etc

Chemical Composition(%)	C	Cr	Mn	Si	Fe	Other
	3.0-5.0	17.0-27.0	1.0-3.0	1.0-3.0	Bal.	-
Hardness	HRC 58-65
Standard Thickness(mm)	3+3; 4+4; 5+5; 6+4; 6+6; 8+4; 8+6; 8+8; 10+10; 12+12; etc (overlay thickness up to 50mm)
Standard Sheet Size(mm)	14003400; 15003000; 2000*3000; (Customized size available)
ASTM G65 Procedure A	0.12 – 0.18g
Operating Temperature	<400 ℃
Base Metal Material	Q235B, Q345B; A36; S235JR and structural steels
Main Industry	Mining, glass industry, cement plant, steel mill, power plant, etc
Fabrication	Plasma cutting, Gouging, Countersunk, stud bolt, Bending

Characteristics:

* By open arc welding technology

* Chemical Composition: C: 3.0-4.5% Cr: 15-35%

* Chromium carbide Cr7C3 volume fraction about 40%

* The thickness of wear resistant layer can reach up to 50 mm

* Heat resistance up to 600°C

* Lager standard wear resistant area 1400*3400 mm; 1500*3000 mm; 2000*3000 mm

* Better flatness with smooth surface

Note:Carbon and Chromium content varies in different plate.

Product detail pictures:

Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Trending Products Screening Plate - WD1000/1100 Wear Plate – Wodon , The product will supply to all over the world, such as: Madras, Madagascar, Kenya, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will offer our best service to satisfy all your needs! Please contact us right away!

Chromium Carbide Wear Parts