Special Price for Hard Face Wear Plate - WD1200/1500 Wear Plate – Wodon

Product Detail

Feedback (2)

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Hardfacing, Flux Cored Wire, Cement Mill Roller Surface Repair, We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.

Special Price for Hard Face Wear Plate - WD1200/1500 Wear Plate – Wodon Detail:

production introduction

WD1200/WD1500 series
Abrasion Resistant Chromium Carbide Overlay

WD1200/WD1500 is chromium carbide composite cladding fusion bonded to a mild steel backing plate. The deposit has been realized by means of submerged arc welding. WD1200/WD1500 wear plate is suitable for application involving severe abrasion and low to medium impact.

● WD1200/WD1500 series:

High chromium high carbon wear plates produced by submerged arc welding; Suited for applications involving severe abrasion and low to medium impact.

Chemicals	Hardness	Sheet Size	Base Metal
C – Cr – Fe	HRC 58-63	14003500/21003500	Q235/Q345. etc

Chemical Composition(%)	C	Cr	Mn	Si	Fe	Other
	3.0-6.0	25.0-45.0	1.0-3.0	1.0-3.0	Bal.	-
Hardness	HRC 58-65
Standard Thickness(mm)	4+4; 5+5; 6+4; 6+6; 8+6; 8+8; 10+6; 10+8; 10+10; 12+12; 12+17; etc (overlay thickness up to 50mm)
Standard Sheet Size(mm)	14003500; 21003500; (Customized size available)
Micro structure	Carbide volume fraction up to 50%
ASTM G65 Procedure A	0.09 - 0.16g
Operating Temperature	<400 ℃
Base Metal Material	Q235B, Q345B; A36; S235JR and structural steels
Main Industry	Mining, glass industry, cement plant, steel mill, power plant, etc
Fabrication	Plasma cutting, Gouging, Countersunk, stud bolt, Bending

Characteristics:

* Chromium carbide overlay wear resistant plate
* By submerged arc welding technology
* Chemical Composition: C: 3.0-6.0% Cr: 25-45%
* Chromium carbide Cr7C3 volume fraction about 50%
* The thickness of wear resistant layer can reach up to 50 mm
* Heat resistance up to 600°C
* Lager standard wear resistant area 1400*3000mm, 1400*3500mm, 2100*3500mm
* Better flatness with smooth surface
* Hardness: HRC58-65

WD1200 Wear plate after bending

wear plate bending04
wear plate bending02
wear plate bending03
wear plate bending01
submerged arc wear plate
05chromium carbide overlay wear plate
08chromium carbide overlay wear plate
09chromium carbide overlay wear plate

Note:Carbon and Chromium content varies in different plate.

Product detail pictures:

Related Product Guide:

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Special Price for Hard Face Wear Plate - WD1200/1500 Wear Plate – Wodon , The product will supply to all over the world, such as: Johannesburg, Yemen, Singapore, We have been seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.

Acroplate