China Renewable Design for Acroplate - WD-M3 Smooth surface – Wodon factory and manufacturers

Renewable Design for Acroplate - WD-M3 Smooth surface – Wodon

Product Detail

Feedback (2)

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Fan Blade Liner, Bulldozer Blade, Distributor, We usually concertrating on acquiring new creative products to fulfill request from our clientele all around the world. Be a part of us and let's make driving safer and funnier jointly!

Renewable Design for Acroplate - WD-M3 Smooth surface – Wodon Detail:

Smooth Surface

Chromium Carbide Overlay Plate

ADVANTAGE:

* Smooth surface, single pass overlay, No surface weld beads

* Consistent microstructure and hardness down to fusion line

* Low friction co-efficient

* Excellent abrasion and impact resistant properties

* Operating temperature <600℃

* Optional in unique non-magnetic overlay

* Available in mill and pre-polished surface finish

TYPICAL TECHNICAL STANDARD

Grade	Chemical composition
	C	Cr	Mn	Si	B	S	P	Nb+Mo+Ti+V+W
WD-M3	2.0-5.0	18-35	<1.5	<1.2	<0.6	<0.033	<0.033	<1.5
WD-M7	2.0-5.0	18-28	<1.5	<1.2	<0.4	<0.033	<0.033	7-10

Basic Elements	WD-M3	WD-M7
Base material	Q235B	Q235B
Main alloy hard phase	Chromium carbide	Chromium carbide + Composite carbide
Primary carbide volume (%)	>37	>37
Overlay Hardness by HV (HRC)	670 (58)	670 (58)
Rubber weheel abrasion test with dry sand (g)	<0.15g	<0.14g
Impact abrasion test (g)	<0.10g	<0.08g
Standard thickness (mm)	5/5, 6/7, 8/9, 10/11, 12/11, 17/11	17/11, 20/11, 24/13
Standard plate size (mm)	10003000, 6003000	600*3000
Recommended application	Common abrasion	Extreme abrasion

Product detail pictures:

Related Product Guide:

Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Renewable Design for Acroplate - WD-M3 Smooth surface – Wodon , The product will supply to all over the world, such as: Guatemala, Belgium, Luxembourg, We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!

Composite Wear Plates