China Manufactur standard Hardfaced Plate - WD1000/1100 Wear Plate – Wodon factory and manufacturers

Manufactur standard Hardfaced Plate - WD1000/1100 Wear Plate – Wodon

Product Detail

Feedback (2)

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for 5+5 Overlay Wear Plate, Powder Separator Blade, Conveyor Chute, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.

Manufactur standard Hardfaced Plate - WD1000/1100 Wear Plate – Wodon Detail:

WD1000/WD1100 series
Abrasion Resistant Chromium Carbide Overlay

WD1000/WD1100 is chromium carbide composite cladding fusion bonded to a mild steel backing plate. The deposit has been realized by means of flux cored arc welding. WD1000/WD1100 wear plate is suitable for application involving high abrasion and low to medium impact.

● WD1000/WD1100 series:

Common chromium carbide wear plates produced by flux cored arc welding; Suited for applications involving high abrasion and low to medium impact.

Chemicals	Hardness	Sheet Size	Base Metal
C – Cr – Fe	HRC 58-63	1400*3400	Q235/Q345. etc

Chemical Composition(%)	C	Cr	Mn	Si	Fe	Other
	3.0-5.0	15.0-35.0	1.0-3.0	1.0-3.0	Bal.	-
Hardness	HRC 58-65
Standard Thickness(mm)	3+3; 4+4; 5+5; 6+4; 6+6; 8+4; 8+6; 8+8; 10+10; 12+12; etc (overlay thickness up to 50mm)
Standard Sheet Size(mm)	14003400; 15003000; 2000*3000; (Customized size available)
ASTM G65 Procedure A	0.12 – 0.18g
Operating Temperature	<400 ℃
Base Metal Material	Q235B, Q345B; A36; S235JR and structural steels
Main Industry	Mining, glass industry, cement plant, steel mill, power plant, etc
Fabrication	Plasma cutting, Gouging, Countersunk, stud bolt, Bending

Remark:

We can customize the plates in different sizes and thickness based on customer’s drawings. we can also cut, bend and weld the wear plates into specific shapes and parts

Characteristics:

* By open arc welding technology

* Chemical Composition: C: 3.0-4.5% Cr: 15-35%

* Chromium carbide Cr7C3 volume fraction about 40%

* The thickness of wear resistant layer can reach up to 50 mm

* Heat resistance up to 600°C

* Lager standard wear resistant area 1400*3400 mm; 1500*3000 mm; 2000*3000 mm

* Better flatness with smooth surface

Note:Carbon and Chromium content varies in different plate.

Product detail pictures:

Related Product Guide:

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for Manufactur standard Hardfaced Plate - WD1000/1100 Wear Plate – Wodon , The product will supply to all over the world, such as: Lesotho, United States, Somalia, Our solutions have national accreditation requirements for qualified, good quality products, affordable value, was welcomed by individuals all over the world. Our products will continue to improve inside the order and appear forward to cooperation with you, Definitely should any of those goods be of curiosity to you, be sure to letus know. We'll be satisfied to supply you a quotation up on receipt of the detailed needs.

Chrome Carbide Overlay Wear Plate