High Quality for Custom Sizes Coo Plate - WD1200/WD1500 Wear Plates – Wodon
High Quality for Custom Sizes Coo Plate - WD1200/WD1500 Wear Plates – Wodon Detail:
WD1200/WD1500 series
Abrasion Resistant Chromium Carbide Overlay
WD1200/WD1500 is chromium carbide composite cladding fusion bonded to a mild steel backing plate. The deposit has been realized by means of submerged arc welding. WD1200/WD1500 wear plate is suitable for application involving severe abrasion and low to medium impact.
● WD1200/WD1500 series:
High chromium high carbon wear plates produced by submerged arc welding; Suited for applications involving severe abrasion and low to medium impact.
|
Chemicals |
Hardness |
Sheet Size |
Base Metal |
|
C – Cr – Fe |
HRC 58-63 |
1400*3500/2100*3500 |
Q235/Q345. etc |
| Chemical Composition(%) |
C |
Cr |
Mn |
Si |
Fe |
Other |
|
3.0-6.0 |
25.0-45.0 |
1.0-3.0 |
1.0-3.0 |
Bal. |
- |
|
| Hardness |
HRC 58-65 |
|||||
| Standard Thickness(mm) |
4+4; 5+5; 6+4; 6+6; 8+6; 8+8; 10+6; 10+8; 10+10; 12+12; 12+17; etc (overlay thickness up to 50mm) |
|||||
| Standard Sheet Size(mm) |
1400*3500; 2100*3500; (Customized size available) |
|||||
| Micro structure |
Carbide volume fraction up to 50% |
|||||
| ASTM G65 Procedure A |
0.09 - 0.16g |
|||||
| Operating Temperature |
<400 ℃ |
|||||
| Base Metal Material |
Q235B, Q345B; A36; S235JR and structural steels |
|||||
| Main Industry |
Mining, glass industry, cement plant, steel mill, power plant, etc |
|||||
| Fabrication |
Plasma cutting, Gouging, Countersunk, stud bolt, Bending |
|||||
Note:Carbon and Chromium content varies in different plate.
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for High Quality for Custom Sizes Coo Plate - WD1200/WD1500 Wear Plates – Wodon , The product will supply to all over the world, such as: Surabaya, Argentina, French, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Nydia from Belgium - 2017.06.19 13:51
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Christopher Mabey from Bolivia - 2018.03.03 13:09
