China Excellent quality Hardfacing – Gas shielded Hardfacing Wires – Wodon factory and manufacturers

Excellent quality Hardfacing – Gas shielded Hardfacing Wires – Wodon

Product Detail

Feedback (2)

We stick with the theory of "quality first, company first, steady improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for Wear Plates, Scraper Converyor Bottom Plate, Hardfacing Wire, The main goal of our company would be to live a satisfactory memory to all of the shoppers, and establish a long term company romantic relationship with customers and users all around the entire world.

Excellent quality Hardfacing – Gas shielded Hardfacing Wires – Wodon Detail:

Gas shielded Hardfacing Wires

Application	Model	Diameter[mm]	Hardness[HRC]	Main Ingredient
High manganese steel hardfacing wire, Suitable for hardfacing hammer head, hammer plate and other high impact parts	D114	1.6	50-55	C, Cr, Mn
Suitable for hardfacing bucket gear, mining machinery and other wear parts	D172	1.2, 1.6	≥40	C, Cr, Mo
Suitable for hardfacing the surface of wear parts, such as gear, digger. mining machinery and etc.	D212	1.2, 1.6	≥45	C, Cr, Mo
Suitable for hardfacing high manganese rail, bulldozer and other wear parts under impact.	D256	1.6	HB≥170	C, Mn
Suitable for hardfacing continuous casting roll	D313	1.6	45-50	C, Cr
Suitable for repairing die and toughening tool, and mechanical parts with high wear performance	D322	1.6	55-63	C, W, Mo
Suitable for hardfacing hot rolling roll	D405	1.6	53-60	C, Cr, Mo, W, V
Suitable for hardfacing general corrosion resistant parts	D430	1.6	35-40	C, Cr
Suitable for hardfacing valve	D502Mo	1.6	35-45	C, Cr, Mo
Suitable for hardfacing continuous casting roll	D518	1.6	40-50	C, Cr, Mo, Ni
Suitable for hardfacing heavy wear parts, multi-layer welding up to 50 mm	D688	1.2, 1.6	50-58	C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up to 20 mm	D788	1.2, 1.6	50-60	C, Cr
Suitable for hardfacing heavy wear part, single layer welding only	D788A	1.2, 1.6	50-60	C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up to 10 mm	D888	1.2, 1.6	58-65	C, Cr
Suitable for hardfacing heat resistant wear parts	D995	1.6	58-65	C, Cr, Nb, W, V

Product detail pictures:

Related Product Guide:

Our well-equipped facilities and exceptional good quality manage throughout all stages of production enables us to guarantee total shopper satisfaction for Excellent quality Hardfacing – Gas shielded Hardfacing Wires – Wodon , The product will supply to all over the world, such as: Anguilla, Mexico, Yemen, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

Bimetal Hardfacing Pipe

Fcw Wires

Flux Cored Wire

Hard Facing

High Manganese Steel Hardfacing

Single Layer Hardfacing

In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.

By Eileen from Mauritius - 2018.09.23 17:37

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!

By Claire from Liberia - 2018.04.25 16:46

Write your message here and send it to us