China Best quality Vertical Cement Welding Wires - Gas shielded Hardfacing Wires – Wodon factory and manufacturers

Best quality Vertical Cement Welding Wires - Gas shielded Hardfacing Wires – Wodon

Product Detail

Feedback (2)

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Esab, Mining Wearing Plate, Wear Solution, Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.

Best quality Vertical Cement Welding Wires - Gas shielded Hardfacing Wires – Wodon Detail:

Gas shielded Hardfacing Wires

Application	Model	Diameter[mm]	Hardness[HRC]	Main Ingredient
High manganese steel hardfacing wire, Suitable for hardfacing hammer head, hammer plate and other high impact parts	D114	1.6	50-55	C, Cr, Mn
Suitable for hardfacing bucket gear, mining machinery and other wear parts	D172	1.2, 1.6	≥40	C, Cr, Mo
Suitable for hardfacing the surface of wear parts, such as gear, digger. mining machinery and etc.	D212	1.2, 1.6	≥45	C, Cr, Mo
Suitable for hardfacing high manganese rail, bulldozer and other wear parts under impact.	D256	1.6	HB≥170	C, Mn
Suitable for hardfacing continuous casting roll	D313	1.6	45-50	C, Cr
Suitable for repairing die and toughening tool, and mechanical parts with high wear performance	D322	1.6	55-63	C, W, Mo
Suitable for hardfacing hot rolling roll	D405	1.6	53-60	C, Cr, Mo, W, V
Suitable for hardfacing general corrosion resistant parts	D430	1.6	35-40	C, Cr
Suitable for hardfacing valve	D502Mo	1.6	35-45	C, Cr, Mo
Suitable for hardfacing continuous casting roll	D518	1.6	40-50	C, Cr, Mo, Ni
Suitable for hardfacing heavy wear parts, multi-layer welding up to 50 mm	D688	1.2, 1.6	50-58	C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up to 20 mm	D788	1.2, 1.6	50-60	C, Cr
Suitable for hardfacing heavy wear part, single layer welding only	D788A	1.2, 1.6	50-60	C, Cr
Suitable for hardfacing heavy wear parts, multi-layer welding up to 10 mm	D888	1.2, 1.6	58-65	C, Cr
Suitable for hardfacing heat resistant wear parts	D995	1.6	58-65	C, Cr, Nb, W, V

Product detail pictures:

Related Product Guide:

We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Best quality Vertical Cement Welding Wires - Gas shielded Hardfacing Wires – Wodon , The product will supply to all over the world, such as: Yemen, Lithuania, Botswana, Adhering to the principle of "Enterprising and Truth-Seeking, Preciseness and Unity", with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective solutions and meticulous after-sales service. We firmly believe that: we're outstanding as we have been specialized.

Bimetal Hardfacing Pipe

Cored Wire

Flux Core Welding Wire

Flux Cored Welding Wire

Flux Cored Wire

Hard Facing

Hardfacing Welding Material

Hardfacing Wire

High Manganese Steel Hardfacing

Wear Plate Welding Wire

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.