China 2018 High quality Chromium Carbide Bimetallic Plate - WD1800 Wear Plates – Wodon factory and manufacturers

2018 High quality Chromium Carbide Bimetallic Plate - WD1800 Wear Plates – Wodon

Product Detail

Feedback (2)

Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for Bucket Wear Protection, Welding Wire Hardfacing, Clad Plate, We warmly welcome friends from all walks of life to cooperate with us.

2018 High quality Chromium Carbide Bimetallic Plate - WD1800 Wear Plates – Wodon Detail:

WD1800 series
Abrasion Resistant Chromium Carbide Overlay

WD1800 is complex carbide composite cladding fusion bonded to a mild steel backing plate. WD1800 wear plate is suitable for application involving high abrasion at elevated temperature up to 900 ℃.

● WD1800 series:

Complex carbide wear plates; Suited for applications involving high abrasion at elevated temperatures up to 900 degree.

Chemicals	Hardness	Sheet Size	Base Metal
C – Cr – Nb – Mo – Ni – W – V – Fe	HRC 58-63	14003500/21003500	Q235/Q345. etc

Chemical Composition(%)	C	Cr	Mn	Si	Mo+Ni+V+Nb+W	Fe
	4.0-7.0	25.0-40.0	-	-	4.0 -14.0	Bal.
Hardness	HRC 58-65
Standard Thickness(mm)	6+6; 8+6; 8+8; 10+10; 12+12; 12+17; 14+26; 12+32; etc (overlay thickness up to 50mm)
Standard Sheet Size(mm)	14003500; 21003500 (Customized size available)
ASTM G65 Procedure A	0.09 - 0.16g
Operating Temperature	<900℃
Base Metal Material	Q235B, Q345B; A36; S235JR and structural steels
Main Industry	Mining, glass industry, cement plant, steel mill, power plant, bulk material handling, etc
Fabrication	Plasma cutting, Gouging, Countersunk, stud bolt, Bending

Note:Carbon and Chromium content varies in different plate.

Product detail pictures:

Related Product Guide:

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for 2018 High quality Chromium Carbide Bimetallic Plate - WD1800 Wear Plates – Wodon , The product will supply to all over the world, such as: Washington, New York, Portland, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Bimetallic Wear Plate